Blog
VIDIZMO articles on how enterprise AI and video data help organizations across industries turn recordings into usable insights.
Page 1 of 22
Troubleshooting a Machine Fault With Recorded Repairs and an AI Assistant
A fault code appears on the infeed servo at 2 a.m., and the technician who fixed the same fault last spring is not on shift. The manual is a scanned ...
October 27, 2026
Combining Sensor Data With Video for Maintenance: What It Takes
A vibration alarm on a pump tells a reliability engineer that something about the bearing has changed, and nothing about what the pump looks like at ...
October 27, 2026
Visual Equipment Monitoring: Leaks, Fire and Changes a Camera Can See
Many machine failures show themselves well before they stop anything, as oil pooling under a gearbox, a drip from a hydraulic fitting that slowly ...
October 27, 2026
Investigating a Quality Escape With Plant Footage: From Complaint to Root Cause
A quality escape is usually found by someone outside the plant. A distributor opens a case and sees the wrong label, or a customer's incoming ...
October 27, 2026
Blocked Exits, Spills and Moved Cameras: Catching What Changed on the Plant Floor
The hazards that turn up most often on an exit route inspection are rarely exotic. A pallet gets staged in front of a fire door because the lane ...
October 27, 2026
Safety Training From Real Incidents: Turning a Near Miss Into a Toolbox Talk
Most safety training videos a plant shows were filmed somewhere else. A stock clip of a slip on a wet floor, a forklift tipping in a warehouse that ...
October 27, 2026
Generative AI for Manufacturing Knowledge: Answers From Your Own SOPs and Videos
Most writing on generative AI for manufacturing, such as Google Cloud's list of five generative AI use cases for manufacturing, surveys where the ...
October 27, 2026
Onboarding Plant Workers: Learning Paths, Checks at the Step and Training Records
Manufacturing onboarding in many plants still means a week of classroom slides, a signature on an attendance sheet and then shadowing whoever happens ...
October 27, 2026
Just-in-Time Training at the Machine: Finding the Right Procedure in Seconds
A plant can hold hundreds of hours of good procedure video and still fail the operator who needs step four of a changeover at 3 a.m., because the ...
October 27, 2026
Capturing Tribal Knowledge on the Plant Floor: Worn Cameras, Documents and SCORM
Most plants know exactly whose retirement worries them. It is the setter who brings the third press back after a die change in forty minutes when ...
October 27, 2026
Predictive Maintenance With Video AI: What Cameras See Before a Machine Fails
A predictive maintenance program is built on instruments: vibration probes on the bearings, thermal surveys of the panels, motor current signatures, ...
October 26, 2026
Quality Control in Manufacturing: Inspection, Defects and the Evidence Behind Every Hold
Quality control in manufacturing is four jobs that most plants treat as one: inspecting what was made, preventing the defect upstream, tracing a ...
October 26, 2026
Knowledge Transfer in Manufacturing: Keeping What Experienced People Know
Every plant has a handful of people whose absence shows up in the numbers during the same week they are gone. When the senior setter is on leave, ...
October 26, 2026
What Is a Real-Time Crime Center? A Guide for Cities and Counties
Somewhere in the last two years, someone probably asked your department whether it should have a real-time crime center. Maybe a council member saw ...
September 28, 2026
Staffing a Real-Time Crime Center When Software Does the Watching
Most chiefs who hear a pitch for a real-time crime center ask the same question before any other, which is whether they will have to hire a room full ...
September 28, 2026
RTCC, EOC or Situational Awareness Center: What Each Room Is For
Walk into a real-time crime center, then into a city's emergency operations center, and you will see much the same thing: a wall of screens, a map, ...
September 28, 2026
Real-Time Crime Centers for Small Agencies: Run Your Own or Share One
A police chief in a town of twelve thousand people, with a department of twenty officers, has usually assumed that a real-time crime center belongs ...
September 28, 2026
Planning a Real-Time Crime Center for a Town of 20,000
Chiefs and city managers who read about real-time crime centers usually reach the same point, which is wanting to see what one would look like for a ...
September 28, 2026